Direct Answer A finished, fully cured resin wall clock is generally safe to have in a home and, kept indoors away from direct sunlight, heat and damp, cured resin art is commonly quoted as lasting 5 to 10 years or more. The quartz movement inside is a separate component: quartz wall clocks are commonly quoted at 5 to 20 years depending on quality, and the battery usually needs replacing every one to three years. For MEHMAT's Kaaba-inspired black and gold clock, the listing's care advice is short and sensible: indoor use only, avoid prolonged direct sunlight, and wipe with a soft, dry cloth. Use an alkaline battery, remove it if the clock stops, and ask the maker about the movement and the weight of your size before you buy.

 

Two Parts, Two Lifespans

A resin wall clock is really two products in one case. The first is the artwork: the black resin face, the clear epoxy layers, the gold glitter band, the numerals and the MDF base. The second is the timepiece: the quartz movement, the hands and the battery. They age differently, and most worries about "how long will it last" come from mixing them up.

The artwork's enemies are ultraviolet light, heat, humidity and physical knocks. The movement's enemies are a dead battery left inside too long, vibration, and a cheap mechanism. Treat each on its own terms and the whole piece lasts.

How Long Does Resin Art Last?

Cured resin art is commonly quoted as lasting 5 to 10 years or more indoors when it is well maintained and kept away from direct sunlight. High-quality art resin can look pristine for a decade in stable indoor conditions. Pieces displayed outdoors, by contrast, tend to show fading or degradation within a few years.

Several factors set where in that range a piece lands:

•         Resin quality. Premium art-grade resins carry UV stabilizers that resist yellowing far better than generic or industrial formulas.

•         UV light. Sunlight is what turns clear epoxy yellow or amber over time. This is why MEHMAT's listing says to avoid prolonged direct sunlight, and why we cover window placement in our placement guide.

•         Heat and humidity. Large temperature swings and damp weaken the material and speed aging.

•         Physical wear. Scratches and dull patches come from rough cleaning and handling.

The listing does not name the resin brand or say whether it contains UV stabilizers, so if you want to know, ask. A black face hides yellowing better than a white or clear one would, but the clear epoxy layers can still yellow, which is why sun exposure matters even on a dark clock.

Is Resin Art Breakable?

Properly cured, thick resin does not break easily, but it is not unbreakable. It can crack, chip or snap if it is thin, dropped onto a hard surface or mixed incorrectly. Thick pieces such as coasters, trays and tabletops handle impacts much better than thin pendants.

A wall clock sits in between: it is a flat, layered piece on an MDF base, and the listing does not state the finished thickness. The practical rule is to treat it like framed art or a mirror. Hold it with both hands, never by the hands or the face, do not stack things on it in transit, and hang it somewhere it cannot be knocked. Cured epoxy is less likely to shatter into sharp shards than glass, but a hard fall onto tile can still chip or crack it.

Is a Finished Resin Clock Safe?

The scary headlines about resin concern liquid resin. Uncured resin can cause skin irritation, chemical burns and lasting allergic sensitization, and the fumes released during mixing and curing can cause headaches and dizziness. Sanding partially cured resin creates dust that is harmful to breathe. Those are makers' hazards, and they are why makers wear gloves, respirators and work with ventilation.

Cured, hardened resin is generally safe to touch. Once the chemical reaction is complete, it becomes stable plastic. For a buyer, three practical points follow:

•         A properly cured clock hardens evenly. If a piece arrives with sticky or tacky patches, or an unusually strong chemical smell, contact the maker rather than hanging it.

•         Do not sand, drill or cut the clock yourself. The dust is the hazard, and you will also damage the finish. If the hanging fitting needs adjusting, get a professional or ask MEHMAT.

•         Keep it out of reach of small children and pets. A wall clock is not a toy, and a fall is the main risk, not the material.

If you are worried about a specific health issue, ask your doctor, and ask the maker about the exact resin used.

The Quartz Movement: Lifespan and Quality

Quartz wall clocks generally last between 5 and 20 years. Cheaper, mass-produced movements often run 2 to 5 years before electronic parts or plastic gears wear out. Average-quality movements usually last 5 to 10 years, and premium movements can pass 10 to 20 years in stable conditions.

MEHMAT's listing describes a metal quartz mechanism with a silent, smooth-sweep action but does not name the manufacturer. That is common for handmade pieces, and it means the honest answer to "how long will the movement last" is that it depends on a component you cannot see. If it matters to you, ask the maker which movement is fitted. Replacement quartz movements are generally inexpensive and standardized, and swapping one is typically a short job for a clock repairer, so a worn-out movement does not mean the artwork is finished.

Silent or Ticking: What Sweep Movement Means

Not every quartz clock is silent. Step movements advance the second hand once per second, which creates the familiar tick. Sweep movements move the hand in a smooth, continuous glide, and because the gears never stop and start the ticking noise disappears.

One trade-off is worth knowing: continuous-sweep motors run at a higher internal frequency, which can drain batteries slightly faster than ticking movements. That is the price of silence, and for a bedroom clock it is usually worth paying.

Batteries: Which, How Often, and What Not to Do

•         Use a standard alkaline cell. Wall clocks typically take a single AA, though you should confirm the size for your movement. A reliable alkaline battery gives a stable 1.5 volts.

•         Avoid rechargeables. Rechargeable NiMH cells usually deliver 1.2 volts, which can make a clock run slow or stop early.

•         Avoid heavy-duty zinc-carbon cells. They can leak or lack sufficient power.

•         Expect to change it every one to three years, depending on movement type.

•         Remove a dead battery promptly. A dead battery left inside can leak acid that corrodes the metal contacts, which is a leading cause of premature clock failure.

•         Keep a spare. A stopped clock on a feature wall is conspicuous.

When you replace the battery, take the clock down carefully, work on a soft surface, and avoid pressing on the face.

Cleaning and Day-to-Day Care

The listing's care instruction is to wipe with a soft, dry cloth. Follow it. A microfiber cloth lifts dust from the gloss without scratching. As precautions of our own rather than listing statements, avoid water, alcohol and household cleaners on the resin, and avoid abrasive pads, because the surface can dull and scratch with improper cleaning.

Dust the glitter band with light strokes, and avoid pressing on the numerals. If the clock hangs in a kitchen-adjacent room, wipe it more often, since cooking vapor leaves a greasy film. Better still, hang it elsewhere, because humidity is listed as something to avoid.

Troubleshooting a Clock That Runs Slow or Stops

1.       Replace the battery with a fresh alkaline cell, and check that it sits properly against the contacts.

2.       Check the hands. If the hour, minute and second hands touch each other or the face, the movement stalls. Gently realign them.

3.       Check the battery contacts for white or green corrosion, which blocks power.

4.       Rule out heat and humidity. A clock above a heat source or in a damp room can misbehave.

5.       Contact the maker. If it still fails, the 7-day check warranty may apply, and MEHMAT's FAQ covers common questions on price, durability and shipping.

What the Warranty Covers, and How to Reach MEHMAT

The product page states a 7-day check warranty: the item must be in the condition you received it, unused, in original packaging, with proof of purchase. For a made-to-order piece, check the cause of any problem within that window and photograph the clock as soon as it arrives. To start a claim or ask a question, use the MEHMAT contact page, WhatsApp +92 346 0133667 or mehmat677@gmail.com.

A Simple Care Routine

Dust it weekly with a soft dry cloth. Check the time against your phone monthly. Replace the battery when the second hand slows, and not later. Keep it out of direct sun and damp. That small routine is what separates a clock that still looks new after several years from one that yellows in a corner. For the design and materials of this particular clock, read the full review, and for sizes and the full range, see the Mehmat Resin Collection or the Kaaba-inspired black and gold resin wall clock page.

Frequently Asked Questions

Q: How long will a resin wall clock last?

A: Cured resin art is commonly quoted at 5 to 10 years or more indoors away from direct sunlight. The quartz movement is commonly quoted at 5 to 20 years depending on quality.

Q: Is cured resin safe to touch and keep at home?

A: Generally yes. Liquid resin is hazardous, but cured, hardened resin is stable. Do not sand or drill a finished clock, because the dust is harmful.

Q: Will the resin turn yellow?

A: Direct UV light is the main cause of yellowing. Keep the clock out of prolonged sunlight, as the listing advises.

Q: What battery should I use?

A: A standard alkaline cell, typically AA for wall clocks (confirm for your movement). Avoid rechargeable NiMH cells, which deliver lower voltage, and remove dead batteries promptly.

Q: Is the clock silent?

A: The listing describes a silent, smooth-sweep quartz movement. Sweep movements glide instead of ticking.

Q: How do I clean it?

A: Wipe with a soft, dry cloth, as the listing instructs. Avoid water, solvents and abrasive pads.

 

Verified Product Reference Data

Everything below was read from the live listing on October 2, 2026. Where the page contradicts itself, both statements are shown.

Field	Verified detail
Product title	MEHMAT Kaaba-Inspired Luxury Resin Wall Clock Black & Gold Islamic Art Arabic Numerals & Glitter Band Handcrafted
Product URL	https://www.mehmat.com/products/kaaba-inspired-black-gold-resin-wall-clock-mehmat-art
Price	Rs. 15,999 (crossed-out Rs. 25,000, "36% OFF", "Save Rs. 9,001")
Sizes	Selector: 12" to 40" in 2" steps (15 sizes). Specifications: 12", 16", 20", 24", 30", 36", 40" plus custom sizes on request
Face and finish	Deep black resin face under layered clear epoxy (also called a "deep matte-black base"); diagonal gold glitter band
Numerals and hands	Gold numerals, Eastern Arabic-Indic or Western; gold hands
Movement	Silent, smooth-sweep quartz mechanism; metal clock mechanism and hands; brand not stated
Base and materials	Solid MDF base; layered clear epoxy resin; gold glitter inlay; resin brand not stated
Colors	Classic black and gold; other colorways and patterns; bespoke color requests welcome
Care	Indoor use only; avoid prolonged direct sunlight; wipe with a soft, dry cloth
Origin	Handcrafted in Pakistan; MEHMAT describes itself as a Pakistan-based artisan home décor studio
Delivery	Product page: 3 to 5 working days (2 to 3 in Karachi). Resin Collection page: made after order with advance payment, about 10 days crafting + 4 days delivery
Shipping	Rs. 200 flat across Pakistan; free on orders of Rs. 3,000 or more; no international terms stated on the product page
Warranty	7-day check warranty: unused, original packaging, proof of purchase; contact mehmat677@gmail.com or WhatsApp +92 346 0133667
Reviews	None yet
Stock status	All sizes show "Variant available" on the product page
Collection	Mehmat Resin Collection
Sibling products (verified)	Islamic Calligraphy Marble Style Resin Wall Clock; Black and Gold Roman Numeral Wall Clock (from Rs. 11,999, was Rs. 20,000)
Gallery	10 gallery images (studio, living room, mall display, dark paneled wall, workshop, office, dining room) plus description images including a café scene
Existing blog posts linked	https://www.mehmat.com/blogs/news/mehmat-resin-wall-clock-faq-2026; https://www.mehmat.com/blogs/news/resin-wall-clock-size-placement-care-guide

Kaaba-Inspired Black & Gold Resin Wall Clock: Design, Materials, Sizes and What to Know Before You Order

Resin Wall Clock Price in Pakistan (2026): What a Black & Gold Kaaba-Inspired Clock Should Cost

Where to Hang a Black & Gold Islamic Wall Clock: Best Walls, Rooms, Sizes and Mistakes to Avoid

Kaaba-Inspired Black & Gold Clock as a Gift: Eid, Ramadan, Nikah, Housewarming and Umrah Return Ideas