Direct Answer (keep near the top of the post) Cured resin art generally lasts 5 to 10 years and can last decades indoors if it is looked after, according to search results summarising resin suppliers. For MEHMAT’s periodic table resin wall clock, the listing’s care advice is short: keep it indoors, keep it out of direct, prolonged sunlight, and dust it with a soft, dry cloth. Heat above about 65°C (150°F) can soften or warp resin, so avoid radiators, cookers and sun-baked walls. The quartz movement needs only a battery change when the hands slow, so the main long-term risks are UV light, heat, moisture and knocks, not wear and tear.

 

What You Are Actually Caring For

A handmade resin clock is several materials working together, and each has its own weaknesses. The listing for MEHMAT’s periodic table resin wall clock describes a wood and MDF base, a high-gloss epoxy resin surface with metallic gold flakes, a ring of fire glass crystals, dark preserved rose accents and a quartz movement behind the dial. Wood and MDF dislike moisture. Epoxy dislikes sustained UV light and strong heat. Preserved flowers can fade. Quartz movements are tough, but they rely on a battery and a clean mechanism.

None of this is unusual, and MEHMAT explains the build in its post on how resin wall clocks are made. It is simply useful to know, because almost every care rule below follows from one of those four facts.

How Long Does a Resin Clock Last?

Search results summarising resin suppliers say that cured resin art generally lasts 5 to 10 years and can last decades, or even generations, if it is kept indoors and cared for. The factors they name are sunlight, temperature and environment. Direct UV light causes yellowing and fading over time, heat above 150°F (65°C) can soften, warp or crack the material, and indoor display away from direct windows extends the life considerably compared with outdoor exposure.

Quartz movements are usually quoted at many years of service, though no one can guarantee a figure for a particular unit, and the MEHMAT listing does not name the movement’s brand or rated life. The honest summary is this: with sensible placement, you should expect years of good looks, and the first thing to wear will usually be the battery and not the clock.

One caution about words. The product page talks about a clock that will serve you for a lifetime, but the warranty is a 7-day check warranty. Treat the lifespan figures above as general guidance for cured epoxy and not as a promise from MEHMAT, and ask the team directly if you need a written commitment.

Sunlight: the Biggest Risk

MEHMAT’s own advice is the clearest in the listing: avoid direct, prolonged sunlight, because extended UV exposure can dull the shine and the gold tone over time. That matches what resin suppliers say about yellowing. A few practical rules follow:

•         Do not hang the clock opposite or beside a window that gets direct sun for hours.

•         If a wall gets morning sun but is shaded after noon, it is usually fine, but watch it over a few weeks.

•         Use curtains or blinds in bright rooms, or choose a wall that sits at right angles to the window.

•         Remember that glass magnifies and concentrates sunlight, so a south or west facing window is the hardest case.

If you are choosing where to hang it, the placement guide for a periodic table chemistry clock covers walls, rooms and lighting in more detail.

Heat, Humidity and Steam

Resin suppliers say that heat above about 65°C can soften or warp epoxy, and that is a temperature easily reached near a radiator, a gas heater, a fireplace, a cooker or a wall that is baked by the afternoon sun. Keep the clock well away from all of these.

Moisture is a different problem. The base is wood and MDF, which swells when it takes up water, and a humid, steamy room is also hard on glossy surfaces. Kitchens, bathrooms and steamy prep rooms are poor places for any resin and MDF clock. In a coastal or humid city, an air-conditioned room is kinder to the piece than an open, damp one.

Cleaning: Less Is More

The listing says an occasional light dusting with a soft, dry cloth is all the clock needs. Resin suppliers add that a soft cloth with a mild, non-abrasive soap can be used for gentle cleaning, but for a piece with crystals, preserved roses and a wooden base the safer course is to stay dry unless there is something to remove.

Do	Do not
Dust with a soft, dry microfibre or cotton cloth	Use paper towels, scouring pads or rough cloths that can scratch the gloss
Wipe in light, straight strokes	Spray cleaner directly on the clock
Use a very lightly damp cloth with mild soap only for a stubborn mark, and dry at once	Use alcohol, acetone, bleach, glass cleaner or solvents on the resin
Use a soft brush or a puffer to clear dust from around the crystals	Pick at crystals or flowers with a fingernail or tool
Keep hot items, sharp objects and perfume sprays away	Hang it where cooking oil or steam reaches it

 

If a mark does not come off with a dry cloth, stop and ask MEHMAT before trying anything stronger. A mistake with a solvent can cloud a glossy surface permanently.

Fire Glass and Crystal Care

The fire glass crystals in the border are set by hand and sealed under the resin. The sensible rule is to treat them like jewellery on a wall: do not pull, press or pick at them. If you ever notice a loose crystal, do not try to fix it with household glue, because many adhesives can mark epoxy. Take a photo and message the team. A resin clock is a made-to-order piece, and it is better handled by the maker.

Preserved Roses and Fading

The dark rose accents are described as preserved. Preserved flowers are more durable than fresh ones, but they can still fade in strong light and can be damaged by moisture. The same advice protects them: shade, dry air, and no spraying. Natural variation in the roses and in the gold texture is normal for handmade work, as MEHMAT’s collection page explains, and it is part of why no two clocks look exactly alike.

The Quartz Movement: Batteries, Silence and Setting the Time

The listing describes a smooth, quiet quartz movement. Quartz clocks keep time by passing electricity from a battery through a small quartz crystal that vibrates at a precise frequency, and a circuit converts those vibrations into pulses that turn the hands. That makes them accurate and low-maintenance, which is why search results single them out as the best all-round choice for everyday use. A few simple points:

•         Battery. The listing does not state the battery type, so ask when you order. Many wall clocks use a single AA cell, but do not assume.

•         When the hands slow or stop. Replace the battery first. Weak batteries are by far the most common cause.

•         Leaking batteries. If a clock will be unused for months, remove the battery, because old cells can leak and damage the mechanism.

•         Setting the time. Use the small wheel on the back of the movement and turn the hands gently, without forcing them.

•         Changing the battery on a heavy clock. Lift it off the wall with both hands and rest it face-down on a soft towel, never on its crystals.

If the movement fails, a replacement quartz movement is an inexpensive part, but opening a sealed piece is best left to the maker.

Moving, Packing and Transporting

If you move house or ship the clock to a relative, the risks are impact and pressure on the surface. Wrap the face in soft tissue or a clean cotton sheet, then bubble wrap, and keep it upright in a box with firm padding. Do not stack anything on top. Do not leave it in a parked car in summer, where interior temperatures can climb well past the 65°C that resin suppliers warn about.

Safety Around Children and Pets

A wall clock is not a toy, and a large resin and MDF piece is heavy. Use wall fixings suited to your wall type and rated well above its weight, and ask MEHMAT for the weight of your size, because the page does not publish it. Hang it high enough to be out of reach of small children, and make sure no furniture below it invites climbing. The small crystals should not be pulled off or put in a mouth. Cured epoxy is generally inert, but that is a general statement and not a MEHMAT safety certification, so do not allow children to chew or scrape the surface.

What the Warranty Covers, and What It Does Not

The 7-day check warranty on the product page asks that the item be unused, in its original packaging, with proof of purchase, and that you contact MEHMAT by email or WhatsApp within the period. For a made-to-order piece, the practical meaning is this: open the box when it arrives, inspect it straight away, photograph any problem, and write to the team within the window. The warranty is not a care guarantee, and damage from sun, heat or moisture would be a different matter, which is another reason to place the clock well. Ask the team to state in writing what the 7 days cover for a made-to-order item. Browse the Mehmat Resin Collection page for the shared made-to-order terms.

A Simple Care Routine

1.       Dust it lightly once a month with a dry, soft cloth.

2.       Every few months, check the spot where it hangs for new sun, a new radiator or a damp patch.

3.       Replace the battery when the hands lag, and remove it before long absences.

4.       Check the wall fixing once a year, particularly for larger sizes.

5.       Keep your order confirmation and photos in one place in case you need to contact the team.

For more on how the clocks are made, which helps explain why they need this level of care, read MEHMAT’s FAQ on durability, safety and care.

Frequently Asked Questions

Q: How long will a resin clock last?

A: Cured resin art generally lasts 5 to 10 years and can last decades if kept indoors and away from direct sun, according to resin suppliers. MEHMAT’s listing gives no specific lifespan.

Q: Will the gold turn yellow or fade in sunlight?

A: Extended direct UV exposure can dull the shine and gold tone, as the listing warns. Keep the clock out of direct, prolonged sun.

Q: How do I clean it?

A: Dust with a soft, dry cloth. For a stubborn mark, use a barely damp cloth with mild soap, then dry it immediately, and avoid solvents and sprays.

Q: Can I hang it in a kitchen or bathroom?

A: It is better not to. Steam and grease affect glossy surfaces, and moisture affects the wood and MDF base.

Q: What if the clock stops?

A: Replace the battery first. If the clock still does not run, contact MEHMAT on WhatsApp or email rather than opening it yourself.

Q: Is it safe near children?

A: Hang it out of reach on a properly rated fixing, and do not let children pull at the crystals. Ask MEHMAT for the weight of your size.

Q: What does the warranty cover?

A: A 7-day check for unused items in original packaging with proof of purchase. Ask for the made-to-order terms in writing.

 

Verified Product Reference Data

Everything below was read from the live listing on October 5, 2026. Where the page contradicts itself, both statements are shown.

Field	Verified detail
Product title (H1)	MEHMAT Luxury Periodic Table Resin Wall Clock – “Elements of Time” Handmade Chemistry Art Alkane Molecule Design
Page title	Periodic Table Resin Wall Clock – Handmade Alkane Molecule Gold Design | MEHMAT
Product URL	https://www.mehmat.com/products/luxury-periodic-table-resin-wall-clock-handmade-chemistry-mehmat-collection
Price	Rs. 15,999 (crossed-out Rs. 25,000, “36% OFF”, “Save Rs. 9,001”); collection page shows “From Rs. 15,999”
Sizes	Selector: 12" to 40" in 2" steps (15 sizes), all currently shown as available; custom sizes on request
Dial	First twelve alkanes, methane to dodecane, in gold over a faded periodic-table backdrop and molecular grid (some photos show white lettering)
Border and accents	Ring of fire glass crystals; dark preserved rose accents; metallic gold flakes
Surface and base	High-gloss epoxy resin over a wood and MDF base; resin brand not stated
Movement	Smooth, quiet quartz movement; brand and battery type not stated
Colours	Black and gold shown; other colourways and motifs mentioned but no selector
Care	Indoor use; avoid direct, prolonged sunlight; occasional light dusting with a soft, dry cloth
Delivery	Product page: 3 to 5 working days (2 to 3 in Karachi). Resin Collection page: made after order with advance payment, about 10 days crafting plus 4 days delivery
Shipping	Rs. 200 across Pakistan; free on orders of Rs. 3,000 or more
Warranty	7-day check warranty: unused, original packaging, proof of purchase; contact mehmat677@gmail.com or WhatsApp +92 346 0133667
Reviews	None yet
Stock status	All 15 sizes show “Variant sold out or unavailable”
Collection	Mehmat Resin Collection
Sibling products	Preserved rose resin clock; Black and gold Roman numeral clock (listed from Rs. 11,999)
Gallery	Nine gallery images (round dial close-up, square close-up with roses, office marble wall, lobby marble pillar, mall display case, bedroom collage, crystals and roses collage, resin pour) plus description images
Existing blog posts linked	luxury-resin-wall-clock-faq; mehmat-resin-wall-clock-styling-size-guide; how-resin-wall-clocks-are-made; resin-wall-clock-vs-luxury-brands-price-comparison (all on Mehmat News)

Periodic Table Resin Wall Clock “Elements of Time”: Alkane Design, Materials, Sizes and What to Know Before You Order

Periodic Table Resin Wall Clock Price in Pakistan (2026): What a Handmade Chemistry Clock Should Cost

Where to Hang a Periodic Table Chemistry Wall Clock: Office, Lab, Classroom, Clinic, Café and Home Study

Chemistry Gift Ideas in Pakistan: Why a Handmade Periodic Table Resin Wall Clock Suits Teachers, Engineers, Pharmacists and Graduates